Turntable Belt

To determine what size belt you require, you will need to measure the diameter of the sub-platter.

The sub-platter is the cylindrical section on the underside of the platter that the belt goes around. On some turntables, it is a separate item and the platter lifts off it. With many turntables, it is like this photo where there is a raised cylinder on the underside of the platter.

You’ll need to lift the platter off and turn it over.

To select the correct sized belt measure the diameter (the distance across not around) the sub-platter.

This will usually be in the range 160mm to 210mm. Then choose the belt size just below the measurement. eg if the diameter is 198mm, choose a 195 belt.

We can source a wide range of belts from 100mm to 300m in diameter.